Product Center
Large model, large air volume, large heating power, suitable for wide openings or places requiring a large amount of heat supplementation; Designed for double-sided blowing, if the installation location is limited, single-sided blowing is used, and the machine model needs to be increased; Customized machine height, the same height as the door, the machine needs to be fixed to the ground and side walls before use; The shell is made of carbon steel plate electrostatic spraying white, and the shell color or stainless steel panel can be customized; There are types with and without control, the latter needs to be equipped with a control box to control the machine.
Large model, large cross-sectional dimension, good barrier effect, suitable for wide openings in large venues; Designed for dual-side blowing; if installation space is limited and single-side blowing is used, a larger machine model is required; Customize machine height to be level with the door; the machine needs to be fixed to the ground and side wall before use; The casing is made of carbon steel plate with electrostatic white spray painting, customizable casing color or stainless steel panel; Available in models with control and without control; the latter requires an additional control box to operate the machine.
Small, surface-mounted unit, low-profile installation, high cost-effectiveness, widely used in engineering; The machine comes with a mounting bracket, and additional brackets or hangers are provided to fix the machine to the side wall or hang it under the ceiling; The casing is made of carbon steel plate with electrostatic white spraying, and the casing color or stainless steel panel can be customized; Requires an ambient temperature above 5℃, continuous heating is required during the heating season to prevent internal heat exchanger from cracking; The machine length does not include the water inlet and outlet pipes, the pipe and pipe fittings space should be considered when selecting the model; Hot water type requires hot water above 60℃, steam type requires steam below 0.4MPa; Available in remote control type and non-control type, non-control type is only for centralized control in engineering.
Small, surface-mounted unit; installation height should be as low as possible; top air intake; machine length can be customized. The machine comes with a hanging bracket; additional brackets or hanging rods are provided to fix the machine to the side wall or hang it under the shed. The casing is made of carbon steel plate with electrostatic white spraying; casing color or stainless steel panel can be customized. Requires ambient temperature above 5℃; continuous heating is required during the heating season to prevent internal heat exchanger from cracking. Machine length does not include inlet and outlet water pipes; consider the space occupied by water pipes and pipe fittings when selecting. Hot water type requires hot water above 60℃; steam type requires steam below 0.4MPa. Available in remote control type and non-control type; non-control type is only for centralized control in engineering.
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat