Product Center
The machine is equipped with a condensate water tray and drain. Cold water circulation in summer requires consideration of condensate drainage. The machine includes a mounting bracket; additional brackets or hangers are required to secure the machine to a side wall or suspend it from the ceiling. The casing is made of carbon steel with electrostatic white powder coating. Custom colors or stainless steel panels are available. Requires an ambient temperature above 5℃. Continuous heating is required during the heating season to prevent internal heat exchanger freezing. Machine length does not include inlet and outlet pipes. Pipe and fitting space requirements must be considered when selecting a model. 7℃ cold water is used in summer, and 60℃ hot water in winter. Models are available for surface mounting and concealed installation. Remote control and non-control models are available. Non-control models are intended for centralized control in engineering applications only.
Models designed for use with suspended ceiling systems are installed flush, with only the unit’s front panel visible above the ceiling. The large panel size effectively conceals the gap between the cabinet and the ceiling; the panel can be removed for maintenance. The panel is made of carbon steel with a white electrostatic powder coating, and custom colors or stainless steel options are available. Operating conditions require ambient temperatures above 5°C; during the heating season, continuous heat supply is necessary to prevent freezing and cracking of the internal heat exchanger. Machine length does not include inlet and outlet water pipes; when selecting a model, account for the space occupied by piping and associated fittings. Hot‑water models require water at temperatures of 60°C or higher, while steam‑type models require steam at pressures below 0.4 MPa. Options include remote‑controlled and non‑controlled versions; the non‑controlled version is intended solely for centralized control in engineering applications.
Large model, large air volume, large heating capacity, suitable for wide openings or places requiring a large amount of supplementary heating. Designed for double-sided blowing. If the installation location is limited, single-sided blowing can be used, requiring an increase in machine model and customized machine height to be flush with the door. The machine needs to be fixed to the ground and side walls before use. The casing is made of carbon steel plate with electrostatic white spraying. Customized casing color or stainless steel panel is available. Requires an ambient temperature above 5℃. Continuous heating is required during the heating season to prevent internal heat exchanger from freezing. Water type requires water above 70℃, and steam type requires steam below 0.4MPa. Available in zoned control type and non-zoned control type. The latter requires additional control box for operation.
Compact model with a small cross-section, low noise level, and weak blocking performance; suitable for narrow openings. Designed for bilateral airflow, it is installed on both sides of the opening and operated with opposing airflows; the unit includes an on/off switch. Customizable machine height to match door height; the unit must be securely anchored to the floor and side walls before use. The housing is made of carbon steel with a white electrostatic powder coating; custom housing colors or stainless steel panels are available. The hot‑water version requires water at 70°C or higher, while the steam version requires steam at 0.4 MPa or less. Operating ambient temperatures must be above 5°C; during the heating season, continuous heat supply is required to prevent freezing and cracking of the internal heat exchanger.
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat