Product Center
Air Duct Electric Heater ◎ As a low-temperature air duct electric heater, the air temperature after heating does not exceed 160℃; ◎ As an air duct, fresh air unit, and electric heating equipment heating component, it heats the air; ◎ The housing is a single-plate structure, without insulation and heat insulation treatment, and requires an external control box; ◎ Essential functions of the control box: air-heat interlock, electric heater overheat protection, grounding protection; ◎ The housing is made of electrostatic spray-painted carbon steel plate. Stainless steel can be used if corrosion protection is required or the temperature is high; ◎ The air duct electric heater needs to be hung and fixed separately, and the front and rear flanges are connected to the air duct; ◎ The 0.8m air duct before and after connecting to the electric heater uses insulated and non-combustible insulation materials; ◎ When installing the air duct electric heater, use insulated parts to prevent accidental leakage; ◎ If the air duct electric heater is installed in the ceiling, the ceiling must have an effective maintenance access; ◎ Divided into two series: PTC thermistor ceramic and metal finned tube, both cannot be used dry-burning.
Air Duct Electric Heater ◎ As a low-temperature air duct electric heater, the air temperature after heating does not exceed 160℃; ◎ As an air duct, fresh air unit, and electric heating equipment heating component, it heats the air; ◎ The housing is a single-plate structure, without insulation and heat insulation treatment, and requires an external control box; ◎ Essential functions of the control box: air-heat interlock, electric heater overheat protection, grounding protection; ◎ The housing is made of electrostatic spray-painted carbon steel plate. Stainless steel can be used if corrosion protection is required or the temperature is high; ◎ The air duct electric heater needs to be hung and fixed separately, and the front and rear flanges are connected to the air duct; ◎ The 0.8m air duct before and after connecting to the electric heater uses insulated and non-combustible insulation materials; ◎ When installing the air duct electric heater, use insulated parts to prevent accidental leakage; ◎ If the air duct electric heater is installed in the ceiling, the ceiling must have an effective inspection opening; ◎ Divided into two series: PTC thermistor ceramics and metal finned tubes, both cannot be used dry-burning.
◎ Composed of metal casing, aluminum radiation panel, heating element, insulation layer, etc.; ◎ The radiation panel is sprayed with a special coating, and when heated, it produces harmless far-infrared rays; ◎ Using thermal radiation heat transfer, it does not directly heat the air, and people or objects directly absorb heat energy; ◎ The human body absorbs heat, similar to solar radiation, and the perceived temperature is 2-5℃ higher than the ambient temperature; ◎ If the ambient temperature is lowered by 2-5℃, energy can be saved by about 30%, significantly saving energy and reducing consumption; ◎ Objects absorb heat and then dissipate heat, and heat energy remains at a low level, reducing the temperature difference in the vertical space; ◎ No noise, does not disturb the air to produce dust, does not glow red, and has high heat conversion efficiency; ◎ The machine is installed at a high position, the optimal installation height is 2-3 meters, and the high-temperature radiation panel should not be touched; ◎ There are two installation methods: hanging and side wall mounting. It does not come with a controller and requires a separate temperature control switch; ◎ The unique heating method makes the product suitable for overall heating, local heating, or outdoor heating;
◎ Uses convective heat transfer; the machine is installed low, with a moderate surface temperature that is safe to touch; ◎ The heating element heats the surrounding air, hot air rises, and cold air fills in, achieving air convection; ◎ Noiseless, does not disturb the air to produce dust, suitable for long-term unattended whole-body warming; ◎ Composed of a metal shell, heating element, thermostat, and switch, electrostatic spray-painted white; ◎ Low-position wall mounting on the wall (such as under a window) or placement on the ground (optional bracket) for use; ◎ The machine has a switch and a thermostat; the machine is placed on the side of the socket, not under the socket; ◎ Not suitable for damp or potentially splashing water locations. Minimum distance from surrounding objects: Front: 500mm; Side: 200mm; Bottom: 200mm; Top: 500mm.
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat