Products

Product Center

Axial steam heater
Axial steam heater
Axial steam heater
Axial steam heater

蒙自Axial steam heater

◎ Using steam with a pressure of 0.4 MPa or less as the medium, a carbon steel tube with aluminum finned heat exchanger is used; ◎ The pipe wall is thick, has good corrosion resistance, and high-pressure custom steel tube with steel finned heat exchangers are available; ◎ Water pipes are installed vertically or horizontally, with top inlet and bottom outlet, equipped with flanges, and a drain valve is required for return water; ◎ It is recommended to use pressure below 0.2 MPa to reduce the impact of high temperature of the heat exchanger on the motor; ◎ When using pressure exceeding 0.2 MPa, a solenoid valve must be installed, and the valve must be closed when the fan stops; ◎ If no solenoid valve is installed, local high temperature around the heat exchanger may trigger motor thermal protection or damage; ◎ Available in standard and economical types. The economical type is suitable for places with low requirements for machine appearance. Standard type: The heat exchanger is built into the shell, and the shell is made of carbon steel plate with electrostatic white spraying; Economical type: The heat exchanger is exposed, with visible welds, and the whole machine is sprayed with gray paint, with slightly lower aesthetics.

Category:

蒙自Hot water steam type warm air blower

Phone: 024-89722880

Product Description

Model Name
NF-QZB Steam Type

Main Use
Side-wall mounted, horizontally blowing product.

Places of Use
Factories, warehouses, garages, farms.

Product Introduction
◎ Uses steam below 0.4MPa as a medium, using a carbon steel pipe wound aluminum finned heat exchanger;
◎ Thick pipe wall, good corrosion resistance, high pressure customizable steel pipe wound steel finned heat exchanger;
◎ Water pipes are set up and down or left and right, top inlet and bottom outlet, with flanges, return water needs to be equipped with a drain valve;
◎ It is recommended to use pressure below 0.2MPa to reduce the impact of high temperature of the heat exchanger on the motor;
◎ Use above 0.2MPa pressure needs to be equipped with a solenoid valve, the valve should be closed when the fan stops;
◎ If not equipped with a solenoid valve, local high temperature around the heat exchanger can trigger motor thermal protection or damage;
◎ Divided into standard and economical types, economical type is suitable for places with low requirements for machine appearance.
Standard Type: The heat exchanger is built into the shell, and the shell is made of carbon steel plate electrostatic spraying white;
Economical Type: The heat exchanger is exposed, with visible welds, the whole machine is sprayed with gray paint, and the appearance is slightly worse.

Main Parameters
Standard Type

Model Length * Width * Height mm Motor Power W(380V) Air Volume m³ 3/h Inlet and Outlet Pipe Diameter Inlet and Return Water 70/60℃ Inlet and Return Water 80/65℃ Inlet and Return Water 90/70℃
Heating Capacity kW Heating Capacity kW Heating Capacity kW
NF-GS18ZB 500*510*550 135 1800 DN32 12 15 18
NF-GS37ZB 690*570*740 250 3700 DN40 25 31 38
NF-GS60ZB 830*630*880 550 6000 DN50 39 49 58
NF-GS80ZB 950*630*1000 850 8000 DN50 55 69 83


Economical Type

Model Length * Width * Height mm Motor Power W(380V) Air Volume m³ 3/h Inlet and Outlet Pipe Diameter Steam Pressure 0.1MPa Steam Pressure 0.2MPa Steam Pressure 0.3MPa
Heating Capacity kW Heating Capacity kW Heating Capacity kW
4Q 465*525*515 135 1800 DN25 16 21 24
5Q 645*575*695 250 3700 DN32 33 44 51
7Q 780*650*830 550 6000 DN32 51 68 78
8Q 915*650*965 850 8000 DN40 72 95 110

    

Model Length * Width * Height mm Motor Power W(380V) Air Volume m³ 3/h Inlet and Outlet Pipe Diameter Steam Pressure 0.1MPa Steam Pressure 0.2MPa Steam Pressure 0.3MPa
Heating Capacity kW Heating Capacity kW Heating Capacity kW
NC30 465*520*515 135 1800 DN25 20 27 31
NC60 645*550*695 250 3700 DN32 44 58 67
NC90 780*630*830 550 6000 DN32 67 89 102
NC125 915*630*965 850 8000 DN40 95 125 145


Precautions
Customizable according to construction drawings or bidding parameters.

 

 

Previous

蒙自High-temperature hot water fan heater

蒙自Low-temperature hot water fan heater

Next

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%2F%2F%2F%E6%9D%B0%E5%87%BA%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home