Products

Product Center

Centrifugal side-blowing electric heater air curtain
Centrifugal side-blowing electric heater air curtain
Centrifugal side-blowing electric heater air curtain
Centrifugal side-blowing electric heater air curtain

蒙自Centrifugal side-blowing electric heater air curtain

Large model, large cross-sectional dimension, good barrier effect, suitable for wide openings in large venues; Designed for dual-side blowing; if installation space is limited and single-side blowing is used, a larger machine model is required; Customize machine height to be level with the door; the machine needs to be fixed to the ground and side wall before use; The casing is made of carbon steel plate with electrostatic white spray painting, customizable casing color or stainless steel panel; Available in models with control and without control; the latter requires an additional control box to operate the machine.

Category:

蒙自Side-blowing electric heating air curtain

Phone: 024-89722880

Product Description

Model Name   
RM20（23、25、28）L-C-D Side-blowing Series III

Main Use     
Installed on both sides of large openings 3-8 meters wide, blocking outdoor air and providing indoor heating.

Place of Use  
Vehicle entrances and exits of factories and warehouses, main entrances of large commercial buildings, and garage ramps.

Product Introduction     
Large model, large cross-sectional size, good blocking effect, suitable for large venues with wide openings;
Designed for double-sided blowing. If the installation location is limited and single-sided blowing is used, the machine model needs to be increased;
Customizable machine height, the same height as the door. The machine needs to be fixed to the ground and side walls before use;
The shell is made of carbon steel plate with electrostatic spraying in white. Customizable shell color or stainless steel panel;
With and without control types. The latter requires an additional control box to control the machine.
Classified by heater material:
PTC electric heating type: Suitable for clean environments and places without conductive dust in the air;
Metal finned tube electric heating type: Suitable for construction sites and factories with poor working environments.
Classified by fan model:
RM20L-C-D: Low noise, suitable for narrow openings and quiet commercial and public places;
RM23L-C-D: Suitable for main entrances of commercial places and garage passages, narrow openings of factories and warehouses;
RM25L-C-D: Slightly higher noise, good blocking effect, suitable for tall openings of factories and warehouses;
RM28L-C-D: High noise, high air pressure, suitable for extra-wide openings of large factories and warehouses.
Classified by heating range:
Energy-saving type: Only heating below 2 meters, blowing hot air for supplementary heating; natural wind blocking above 2 meters;
Standard type: All hot air blowing, high electric heating power, only suitable for places requiring a large amount of supplementary heating.

Main Parameters  

Opening Width
m 		Model Power Supply V Height
mm 		Motor
Total Power W 		Air Volume
m 3/h		 Air Speed
m/s 		Optional
Electric Heating Power kW
Motor Heater
3-3.6 RM2022L-C-D 380 380 five-wire system 2200 750 4800 8 24 32 40
RM2028L-C-D 2800 1000 6400 32 43 54
RM2036L-C-D 3600 1250 8000 40 54 67
3-4.2 RM2322L-C-D 2200 1110 6000 10 30 40 50
RM2328L-C-D 2800 1480 8000 40 54 67
RM2336L-C-D 3600 1850 10000 50 67 83
RM2342L-C-D 4200 2220 12000 60 80 100
3.6-5 RM2522L-C-D 2200 1650 7500 12 38 50 63
RM2536L-C-D 3600 2750 12500 63 84 105
RM2542L-C-D 4200 3300 15000 75 100 126
RM2550L-C-D 5000 3850 17500 88 117 147
5-8 RM2822L-C-D 2200 2250 8400 14 42 56 70
RM2852L-C-D 5200 5250 19600 98 131 164
RM2860L-C-D 6000 6000 22400 112 150 188
RM2868L-C-D 6800 6750 25200 126 168 211
RM2876L-C-D 7600 7500 28000 140 187 234

Remarks:
1. Choose one of the three "optional electric heating power" options to purchase.
2. These are standard model parameters; the "electric heating power" of the energy-saving model is the value of the 2.2-meter machine height of the same series in the table. Other parameters of the energy-saving model can refer to the standard model.
 

Model Length * Width mm
PTC Electric Heating Type Metal Finned Tube Electric Heating Type
RM20L-C-D 700*500 950*500
RM23L-C-D 700*500 950*500
RM25L-C-D 750*500 1000*500
RM28L-C-D 850*550 1050*550


Precautions     
Engineering matching models, customizable according to construction drawings.

 

 

Previous

蒙自Axial side-blown explosion-proof

蒙自None

Next

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%2F%2F%2F%E6%9D%B0%E5%87%BA%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home