Product Center
平度Finned tube heat exchanger with aluminum fins
Category:
平度Heat exchanger
Phone: 024-89722880
Product Description
Model Name
SRL Steel Pipe Wound Aluminum Finned Heat Exchanger
Main Applications
Air heating heat exchange device.
Places of Use
Hot water above 70℃ or low-pressure steam.
Product Introduction
◎ Air heat exchanger using hot water above 70℃ or steam below 0.4MPa as medium;
◎ Uses steel pipe wound aluminum fins, with thick pipe walls and large diameter, good corrosion resistance, scaling and freeze-cracking performance;
◎ Steam pressure limit 0.8MPa, it is recommended to use less than 0.4MPa to prevent high temperature or cracking;
◎ Used as a heating equipment heat exchanger, it can also be installed in a drying room to dry materials;
◎ Multiple sets can be combined and arranged in the mine entrance hot air room to heat the fresh air sent underground;
◎ As a preheater, it increases the temperature of low-temperature fresh air to prevent the copper pipe heat exchanger in the unit from cracking.
Precautions
◎ The heating capacity is related to the air volume, inlet air temperature, supply and return water temperature, and steam pressure;
◎ When ordering, please provide the required heating capacity and the corresponding operating parameters mentioned above;
◎ Carbon steel pipes are generally used, and stainless steel materials can be customized if higher corrosion resistance is required;
◎ The thermal conductivity is not as good as copper pipes, it is not recommended to use it when the water temperature is low or the steam pressure is too high.
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat