Products

Product Center

Embedded hot-water heater fan
Embedded hot-water heater fan

平度Embedded hot-water heater fan

It is installed flush within a suspended ceiling with a bottom elevation not exceeding 4 meters, with the unit’s front panel level with the ceiling. With downward air supply, it reduces vertical temperature differentials in the room, delivering significant energy savings. The unit’s front panel remains exposed outside the ceiling; maintenance can be performed simply by removing the panel, making it easier to service than concealed‑mount models. Available in three models to suit different ceiling heights; for quiet environments, choose the low‑noise version. Offered in remote‑control and non‑control versions; the latter requires an additional control box or switch box for operation.

Category:

平度Hot water steam type warm air blower

Phone: 024-89722880

Product Description

Model Name
NF-S(Q)LQR Embedded Series

Main uses
Designed for use with decorative suspended ceilings, the unit is recessed into the ceiling, with its panel flush with the surface.

Place of Use
For ceiling heights of 4 meters or less, the machine must be installed as a recessed unit on the suspended ceiling.

Product Overview
It is installed flush within a suspended ceiling whose bottom elevation does not exceed 4 meters, with the machine’s front panel level with the ceiling.
Underfloor air supply reduces the vertical temperature gradient in the room, delivering significant energy savings.
The machine’s control panel is exposed outside the enclosure; simply remove the panel for maintenance, making it easier to service than concealed‑mount models.
Available in three models to suit different ceiling heights; for quiet environments, choose the low-noise model.
Available in remote‑control and non‑remote‑control versions; the latter requires a separate control box or switch box for operation.

Product image

Main Parameters
Hot-water type

Shed height m Model number Length × Width × Height mm Motor power W (220V) Airflow m 3/h Inlet and outlet pipe diameter Supply and return water temperatures: 60/50°C Supply and return water temperatures: 70/60°C Supply and return water temperatures: 80/65°C
Heating capacity kW Heating capacity kW Heating capacity kW
≤2.6 NF-S08LQR 790*790*280 60 800 DN25 7 8 9
≤3 NF-S11LQR 790*790*280 100 1100 DN25 9 11 12
≤4 NF-S14LQR 790*790*330 200 1400 DN32 11 14 16


Steam-type

Shed height m Model number Length × Width × Height mm Motor power W (220V) Airflow m 3/h Inlet and outlet pipe diameter Steam pressure 0.1 MPa Steam pressure 0.2 MPa Steam pressure 0.3 MPa
Heating capacity kW Heating capacity kW Heating capacity kW
≤2.6 NF-Q08LQR 790*790*280 60 800 DN25 8 10 11
≤3 NF-Q11LQR 790*790*280 100 1100 DN25 10 14 16
≤4 NF-Q14LQR 790*790*330 200 1400 DN25 13 18 20


Precautions
1. Selection and design, or custom fabrication, can be carried out based on the construction drawings, site conditions, and specific requirements.
2. The panel is made of carbon steel with a white electrostatic powder coating; custom colors or stainless steel options are available.

 

 

Previous

平度Cold and hot dual-system hanging warm air blower

平度Industrial cabinet-type hot water fan heater

Next

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%2F%2F%2F%E6%9D%B0%E5%87%BA%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home