Products

Product Center

Ceiling-mounted hot-water steam air curtain
Ceiling-mounted hot-water steam air curtain
Ceiling-mounted hot-water steam air curtain
Ceiling-mounted hot-water steam air curtain

平度Ceiling-mounted hot-water steam air curtain

Models designed for use with suspended ceiling systems are installed flush, with only the unit’s front panel visible above the ceiling. The large panel size effectively conceals the gap between the cabinet and the ceiling; the panel can be removed for maintenance. The panel is made of carbon steel with a white electrostatic powder coating, and custom colors or stainless steel options are available. Operating conditions require ambient temperatures above 5°C; during the heating season, continuous heat supply is necessary to prevent freezing and cracking of the internal heat exchanger. Machine length does not include inlet and outlet water pipes; when selecting a model, account for the space occupied by piping and associated fittings. Hot‑water models require water at temperatures of 60°C or higher, while steam‑type models require steam at pressures below 0.4 MPa. Options include remote‑controlled and non‑controlled versions; the non‑controlled version is intended solely for centralized control in engineering applications.

Category:

平度Top-blowing hot steam type air curtain

Phone: 024-89722880

Product Description

Model Name   
RM16 (20, 23) LQR-S(Q) Embedded Series

Main uses     
It is recessed and installed on a suspended ceiling no higher than 3.2 meters, preventing outdoor air from entering while providing supplemental heating indoors.

Place of Use  
The machine needs to be embedded and installed in a location mounted on the overhead canopy.

Product Overview     
This model is designed for use with decorative suspended ceilings; it is installed flush, with only the unit’s front panel visible above the ceiling.
The panel is large, effectively concealing the gap between the enclosure and the suspended ceiling; it can be removed for maintenance.
The panel is made of carbon steel with an electrostatic white powder coating; custom panel colors or stainless steel options are available.
The ambient temperature must be maintained above 5°C, and continuous heating is required during the heating season to prevent freezing and cracking of the internal heat exchanger.
The machine’s length does not include the inlet and outlet water pipes; when selecting the model, account for the space occupied by the pipes and associated piping accessories.
The hot-water type requires water at temperatures above 60°C, while the steam type requires steam at pressures below 0.4 MPa.
They are available in remote‑control and non‑control versions; the non‑control version is intended solely for centralized control in engineering applications.
Classification by fan model:
RM16LQR-S(Q): Low noise, suitable for small venues with low suspended ceilings and quiet environments;
RM20LQR-S(Q): Balances noise reduction and blocking performance, suitable for medium to large, quiet venues.
RM23LQR-S(Q): Excellent blocking performance, suitable for large venues with high ceilings and heavy foot traffic.
Compared with concealed‑mount models:
Easy installation: The panel is larger than the enclosure, effectively concealing the gap between the enclosure and the suspended ceiling.
Easy maintenance: The panel can be removed for servicing, and the ceiling canopy remains intact even when the unit is disassembled.
High efficiency and energy savings: Hot air beneath the suspended ceiling serves as the supply air, delivering a higher outlet air temperature at the same heating capacity.

Main Parameters
Hot-water type

Installation
Height
m 		Model number Power supply
V 		Panel length
mm 		Motor
Total power W 		Air volume
m 3/h		 Wind speed
m/s 		Enter and exit
Pipe diameter 		Supply and return water temperatures: 70/60°C Supply and return water temperatures: 80/65°C Supply and return water temperatures: 90/70°C
Heating capacity
kW 		Heating capacity
kW 		Heating capacity
kW
2.4-2.6 RM1609LQR-S 220 930 200 1700 9 DN32 15 20 24
RM1612LQR-S 1230 300 2550 10 22 29 34
RM1615LQR-S 1530 400 3400 10 28 37 44
RM1618LQR-S 1830 400 3400 9 30 40 48
RM1620LQR-S 2030 500 4250 10 39 52 60
2.5-3 RM2009LQR-S 380 930 250 1600 8 DN40 17 23 27
RM2012LQR-S 1230 440 2600 9 25 33 39
RM2015LQR-S 1530 500 3200 9 32 43 50
RM2018LQR-S 1830 500 3200 8 36 48 56
RM2020LQR-S 2030 750 4800 9 45 60 70
2.8-3.2 RM2309LQR-S 380 930 370 2000 9 DN50 20 26 31
RM2312LQR-S 1230 640 3400 10 28 38 44
RM2315LQR-S 1530 740 4000 10 37 49 58
RM2318LQR-S 1830 740 4000 9 41 55 64
RM2320LQR-S 2030 1110 6000 10 51 69 80


Steam type

Installation
Height
m 		Model number Power supply
V 		Panel length
mm 		Motor
Total power W 		Air volume
m 3/h		 Wind speed
m/s 		Enter and exit
Pipe diameter 		Steam pressure 0.1 MPa Steam pressure 0.2 MPa Steam pressure 0.3 MPa
Heating capacity
kW 		Heating capacity
kW 		Heating capacity
kW
2.4-2.6 RM1609LQR-Q 220 930 200 1700 9 DN25 17 22 25
RM1612LQR-Q 1230 300 2550 10 23 31 35
RM1615LQR-Q 1530 400 3400 10 30 39 45
RM1618LQR-Q 1830 400 3400 9 34 44 50
RM1620LQR-Q 2030 500 4250 10 40 53 61
2.5-3 RM2009LQR-Q 380 930 250 1600 8 DN32 19 25 29
RM2012LQR-Q 1230 440 2600 9 26 35 40
RM2015LQR-Q 1530 500 3200 9 34 44 51
RM2018LQR-Q 1830 500 3200 8 37 49 56
RM2020LQR-Q 2030 750 4800 9 46 60 70
2.8-3.2 RM2309LQR-Q 380 930 370 2000 9 DN40 24 32 36
RM2312LQR-Q 1030 640 3400 10 33 44 50
RM2315LQR-Q 1530 740 4000 10 42 56 64
RM2318LQR-Q 1830 740 4000 9 46 61 70
RM2320LQR-Q 2030 1110 6000 10 57 76 87


Precautions
The machine model is designed to match the project specifications and can be custom‑made according to the drawing‑specified length and parameters.

 

 

Previous

平度Cold and hot air curtain series

平度None

Next

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%2F%2F%2F%E6%9D%B0%E5%87%BA%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home