Products

Product Center

Engineering hot air curtain
Engineering hot air curtain
Engineering hot air curtain
Engineering hot air curtain

蒙自Engineering hot air curtain

Large model, large air volume, large heating power, suitable for large venues requiring a large amount of heat supplement; The shell is made of carbon steel electrostatic spray white, the shell color or stainless steel panel can be customized; There are remote control type and non-control type, non-control type is only for centralized control in engineering.

Category:

蒙自Top-blowing electric heating air curtain

Phone: 024-89722880

Product Description

Model Name   
RM35(45, 63)Z-D Engineering Series

Main Purpose     
Installed at a height of 3-5 meters, the lower the better, to block outdoor air from entering and provide indoor heat补 heat;
Mainly used in factories, or in places with the purpose of providing large amounts of supplementary heat补 heat heating补 heat;

Place of Use  
Motor vehicle entrances/exits of factory warehouses, main entrances of large venues, or ramp entrances of underground parking lots;

Product Introduction     
Large model, large air volume, large heating power, suitable for large venues requiring a large amount of supplementary heat;
The shell is made of carbon steel plate with white electrostatic spray coating, and the shell can be customized in color or with a stainless steel panel;
Available in remote control type and non-control type, the non-control type is only for centralized control in engineering applications;
Classified by heater material:
PTC electric heating type: suitable for clean environments and places without conductive dust in the air;
Metal finned tube electric heating type: suitable for construction sites and factories with poor working environments;
Classified by fan model:
RM35Z-D: Low noise, suitable for places where the machine installation base is low and the environment is quiet;
RM45Z-D: Suitable for main entrances of commercial or public places, and lower openings of factory warehouses;
RM63Z-D: Large heating capacity, suitable for high openings in factory warehouses or places requiring a large amount of supplementary heat;

Product Images

Main Parameters  

Installation Height
m 		Model Power Supply V Length
mm 		Motor
Total Power W 		Air Volume
m 3/h		 Wind Speed
m/s 		Optional Electric Heating
Motor Heater Power kW
≤3.2 RM3505Z-D 380 380
Five-wire system 		450 170 1600 8 9 12 14
RM3509Z-D 900 340 3200 8 18 24 28
RM3514Z-D 1350 510 4800 8 27 36 42
RM3518Z-D 1800 680 6400 8 36 48 56
RM3523Z-D 2250 850 8000 8 45 60 70
3-4 RM4506Z-D 600 250 3500 9 20 25 30
RM4512Z-D 1200 500 7000 9 40 50 60
RM4518Z-D 1800 750 10500 9 60 75 90
RM4524Z-D 2400 1000 14000 9 80 100 120
4-5 RM6308Z-D 800 550 5400 10 30 40 50
RM6316Z-D 1600 1100 10800 10 60 80 100
RM6324Z-D 2400 1650 16200 10 90 120 150

Note: Three electric heating power options are available;
 

Model Machine Width*Height mm
PTC Electric Heating Type Metal Finned Tube Electric Heating Type
RM35Z-D 450*600 450*700
RM45Z-D 550*600 550*700
RM63Z-D 750*800 800*900


Precautions   
1. Engineering matching models can be customized according to construction drawing parameters;
2. High energy consumption, not recommended unless a large amount of supplementary heating is required.

 

 

Previous

蒙自External Rotor Centrifugal Electric Heating Air Curtain

蒙自Top-blowing embedded electric air curtain

Next

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%2F%2F%2F%E6%9D%B0%E5%87%BA%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home