Centrifugal side-blowing electric heater air curtain
Keywords:
- Description
-
Model Name
RM20（23、25、28）L-C-D Side-blowing Series III
Main Use
Installed on both sides of large openings 3-8 meters wide, blocking outdoor air and providing indoor heating.
Place of Use
Vehicle entrances and exits of factories and warehouses, main entrances of large commercial buildings, and garage ramps.
Product Introduction
Large model, large cross-sectional size, good blocking effect, suitable for large venues with wide openings;
Designed for double-sided blowing. If the installation location is limited and single-sided blowing is used, the machine model needs to be increased;
Customizable machine height, the same height as the door. The machine needs to be fixed to the ground and side walls before use;
The shell is made of carbon steel plate with electrostatic spraying in white. Customizable shell color or stainless steel panel;
With and without control types. The latter requires an additional control box to control the machine.
Classified by heater material:
PTC electric heating type: Suitable for clean environments and places without conductive dust in the air;
Metal finned tube electric heating type: Suitable for construction sites and factories with poor working environments.
Classified by fan model:
RM20L-C-D: Low noise, suitable for narrow openings and quiet commercial and public places;
RM23L-C-D: Suitable for main entrances of commercial places and garage passages, narrow openings of factories and warehouses;
RM25L-C-D: Slightly higher noise, good blocking effect, suitable for tall openings of factories and warehouses;
RM28L-C-D: High noise, high air pressure, suitable for extra-wide openings of large factories and warehouses.
Classified by heating range:
Energy-saving type: Only heating below 2 meters, blowing hot air for supplementary heating; natural wind blocking above 2 meters;
Standard type: All hot air blowing, high electric heating power, only suitable for places requiring a large amount of supplementary heating.
Main ParametersOpening Width
mModel Power Supply V Height
mmMotor
Total Power WAir Volume
m 3/hAir Speed
m/sOptional
Electric Heating Power kWMotor Heater 3-3.6 RM2022L-C-D 380 380 five-wire system 2200 750 4800 8 24 32 40 RM2028L-C-D 2800 1000 6400 32 43 54 RM2036L-C-D 3600 1250 8000 40 54 67 3-4.2 RM2322L-C-D 2200 1110 6000 10 30 40 50 RM2328L-C-D 2800 1480 8000 40 54 67 RM2336L-C-D 3600 1850 10000 50 67 83 RM2342L-C-D 4200 2220 12000 60 80 100 3.6-5 RM2522L-C-D 2200 1650 7500 12 38 50 63 RM2536L-C-D 3600 2750 12500 63 84 105 RM2542L-C-D 4200 3300 15000 75 100 126 RM2550L-C-D 5000 3850 17500 88 117 147 5-8 RM2822L-C-D 2200 2250 8400 14 42 56 70 RM2852L-C-D 5200 5250 19600 98 131 164 RM2860L-C-D 6000 6000 22400 112 150 188 RM2868L-C-D 6800 6750 25200 126 168 211 RM2876L-C-D 7600 7500 28000 140 187 234 Remarks:
1. Choose one of the three "optional electric heating power" options to purchase.
2. These are standard model parameters; the "electric heating power" of the energy-saving model is the value of the 2.2-meter machine height of the same series in the table. Other parameters of the energy-saving model can refer to the standard model.
Model Length * Width mm PTC Electric Heating Type Metal Finned Tube Electric Heating Type RM20L-C-D 700*500 950*500 RM23L-C-D 700*500 950*500 RM25L-C-D 750*500 1000*500 RM28L-C-D 850*550 1050*550
Precautions
Engineering matching models, customizable according to construction drawings.
Product inquiry
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat