Axial side-blown explosion-proof
Keywords:
- Description
-
Model Name
RM35 (45, 63) Z-C-D Side-blowing Series II
Main Purpose
Double-sided installation for large openings 3-6 meters wide, blocking outdoor air entry and supplementing indoor heat.
Applicable Locations
Vehicle entrances/exits for factories and warehouses, main customer entrances for large commercial establishments, and garage ramp openings in parking lots.
Product Introduction
Large model, large air volume, high heating power, suitable for wide openings or places requiring significant heat supplementation;
Designed for double-sided blowing; if installation space is limited and single-sided blowing is used, a larger machine model needs to be selected;
Customized machine height, same height as the door; the machine needs to be fixed to the ground and side wall before use;
The casing is made of carbon steel plate with electrostatic white spray coating, customizable casing color or stainless steel panel;
Divided into models with and without control; the latter requires an additional control box to operate the machine.
Classified by Heater Material:
PTC electric heating type: suitable for clean environments without conductive dust in the air;
Metal finned tube electric heating type: suitable for construction sites and factories with poor working environments.
Classified by Fan Model:
RM35Z-C-D: Low noise, suitable for narrow openings and quiet commercial and public places;
RM45Z-C-D: Suitable for main entrances of commercial establishments, garage passages, and narrow openings in factories and warehouses;
RM63Z-C-D: High heating power, suitable for wide openings in factories and mines or places requiring significant heat supplementation.
Classified by Heating Zone:
Energy-saving type: Heats only below 2 meters, blowing hot air for heat supplementation; above 2 meters, blows natural air for blocking;
Standard type: All hot air blowing, high electric heating power, only suitable for places requiring significant heat supplementation.
Main ParametersOpening Width
mModel Power V Height
mmMotor
Total Power WAir Volume
m 3/hAir Velocity
m/sOptional
Electric Heating Power kWMotor Heater 3-3.6 RM3522Z-C-D 380 380 five-wire system 2200 680 6400 8 30 45 55 RM3526Z-C-D 2600 850 8000 8 38 56 68 RM3530Z-C-D 3000 1020 9600 8 45 68 80 RM3536Z-C-D 3600 1190 11200 8 53 79 95 RM3540Z-C-D 4000 1360 12800 8 60 90 110 3-4.2 RM4522Z-C-D 2200 750 10500 9 50 75 90 RM4528Z-C-D 2800 1000 14000 9 65 100 120 RM4534Z-C-D 3400 1250 17500 9 85 125 150 RM4540Z-C-D 4000 1500 21000 9 100 150 180 RM4546Z-C-D 4600 1750 24500 9 115 175 210 RM4552Z-C-D 5200 2000 28000 9 130 200 240 4-6 RM6320Z-C-D 2000 1100 10800 10 50 75 90 RM6328Z-C-D 2800 1650 16200 10 75 115 135 RM6336Z-C-D 3600 2200 21600 10 100 150 180 RM6344Z-C-D 4400 2750 27000 10 125 190 225 RM6352Z-C-D 5200 3300 32400 10 150 230 270 RM6360Z-C-D 6000 3850 37800 10 175 265 315 Remarks:
1. Choose one from the three "Optional Electric Heating Power" options for purchase.
2. This refers to standard type parameters; the energy-saving type's "Electric Heating Power" is the value for 2 or 2.2-meter machine heights in the same series as shown in the table, and other energy-saving type parameters can refer to the standard type.
Model Length*Width mm PTC Electric Heating Type Metal Finned Tube Electric Heating Type RM35Z-C-D 600*500 750*500 RM45Z-C-D 600*600 750*600 RM63Z-C-D 700*750 800*750
Precautions
1. Can be customized according to construction drawing parameters.
2. If a high blocking effect is required, this model is not recommended.
Product inquiry
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat