Steel pipe finned tube heat exchanger

◎ Air heat exchanger using steam with a pressure of 0.4 MPa or less, used with a steam trap; ◎ Uses steel pipe with steel fins, thick pipe wall and large diameter, good corrosion resistance, scaling and freeze cracking performance; ◎ Steam pressure limit 0.8 MPa, it is recommended to use less than 0.4 MPa to prevent high temperature or cracking; ◎ Used as a heating equipment heat exchanger, it can also be arranged in the drying room to dry materials; ◎ Multiple sets can be arranged in the hot air room at the mine entrance to heat the fresh air sent underground; ◎ As a preheater, it increases the temperature of the low-temperature fresh air to prevent the copper pipe heat exchanger in the unit from freezing and cracking.

Keywords:

Category:

Sales hotline:

Description

Model Name
SRZ Steel Pipe Wound Steel Fin Heat Exchanger

Main Applications
Air heating heat exchange device

Places of Use
Low-pressure steam below 0.4MPa

Product Introduction
◎ Air heat exchanger using steam below 0.4MPa as the medium, used with a steam trap;
◎ Uses steel pipe wound steel fins, with thick pipe walls and large diameter, good corrosion resistance, scaling and freeze-cracking performance;
◎ Steam pressure limit 0.8MPa, it is recommended to use less than 0.4MPa to prevent high temperature or cracking;
◎ Used as a heating equipment heat exchanger, it can also be installed in a drying room to dry materials;
◎ Multiple sets can be combined and arranged in the mine entrance hot air room to heat the fresh air sent underground;
◎ As a preheater, it increases the temperature of the low-temperature fresh air to prevent the copper tube heat exchanger in the unit from cracking.

Precautions
◎ Only use steam, the heating capacity is related to the air volume, inlet air temperature, and steam pressure;
◎ When ordering, please provide the required heating capacity and the corresponding operating parameters mentioned above;
◎ Carbon steel pipes are conventionally used, and stainless steel materials can be customized for higher corrosion resistance requirements;
◎ High temperature resistance is better than SRL, but the cross-sectional dimensions are larger than SRL under the same parameters.

Steel pipe finned tube heat exchanger

Sorry，当前栏目暂无内容!

Sorry，The current column has no content!