Aikote metal finned tube electric heater
Keywords:
Category:
- Description
-
Model Name
FD-G Metal Finned Tube Electric Heater
Main Applications
Electric heating component for air heating.
Places of Use
Non-explosion-proof locations with poor air environment.
Product Introduction
Air Duct Electric Heater
◎ As a low-temperature air duct electric heater, the air temperature after heating does not exceed 160℃;
◎ As an air duct, fresh air unit, and electric heating equipment heating component, it heats the air;
◎ The casing is a single-plate structure, without insulation and heat insulation treatment, and needs to be used with an external control box;
◎ Essential functions of the control box: wind-heat interlock, electric heater overheating protection, grounding protection;
◎ The casing is made of electrostatic sprayed carbon steel plate. For corrosion resistance or high temperature, stainless steel can be used;
◎ The air duct electric heater needs to be hung and fixed separately, and the front and rear flanges are connected to the air duct;
◎ The 0.8m air duct before and after connecting to the electric heater uses insulated and non-combustible insulation materials;
◎ When installing the air duct electric heater, use insulated parts to prevent accidental leakage;
◎ If the air duct electric heater is installed in the ceiling, the ceiling must have an effective inspection opening;
◎ Divided into PTC thermistor ceramic and metal finned tube series, both cannot be used for dry burning.
Metal Finned Tube Series
◎ Composed of stainless steel finned tubes, modified magnesium oxide powder, electric heating alloy wires, and casing;
◎ The surface of the electric heater is not energized, suitable for non-explosion-proof places with poor air environment;
◎ The finned tube heater has a large thermal inertia and cools slowly, so the fan needs to be extended to close the time;
◎ With the same electric heating power, the cross-sectional size of the finned tube heater is larger than that of the PTC heater;
◎ The finned tubes are available in 201 and 304 stainless steel materials. Choose the latter for corrosive gases;
◎ There are two types: flange-type straight pipe and flange-type U-pipe. Choose the former for high wind speed and wind pressure.
Product Images
Flange-type Straight Pipe
Precautions
The oncoming wind speed should not be lower than 2m/s, and it cannot be used for static dry burning.
Product inquiry
SHENYANG ACT TECHNOLOGY CO.,LTD.
Tel:+86-13804980877
Email:act88272927@163.com
Address: Qianyaobao Village, Qingshui Street, Shenbei New District, Shenyang City
Technology Department:+86-24-31329998
Purchasing Department:+86-24-31329977
WeChat